Product Details
What comes in the Testclear Powdered Urine Kit (not synthetic or fake urine)?
- One vial containing powdered urine
- One 50 ml plastic medical transport vial with a blue lid
- Two air-activated heaters
Instructions
- Pour the powdered urine in the small vial into the larger 50 ml tube.
- Slowly fill the tube with water to the very top, screw the blue cap on tightly, and shake until the powder is completely dissolved.
- Apply the temperature strip on the front of the 50ml tube. Open the heater package, peel the paper off of one heater, and stick it to the backside of the tube, directly opposite the temperature strip.
- Before conducting your experiment, verify the temperature is within the correct range (90-100F/32-37C).
Tips and Tricks To Pass the Urine Drug Test with Not Synthetic Urine or Fake Urine.
-
Always call or email before your experiment if there are any questions. Don't guess; ask. - please reach out to [email protected] or our live chat
-
Before conducting the urine test simulation, you must verify that the urine temperature is between 90F and 100F/32C and 37C.
-
We suggest you start with room temperature instead of hot or warm water because the heater we give you brings the water up to the correct temperature range. Use one heater unless you want to get to the proper temperature faster.
-
It is not broken if you do not see a reading on the temperature strip. The sample is either too cold or too hot. The temperature strip is highly accurate, reusable, and the highest-quality component in the kit.
-
If the urine is too cold, be patient and let the heater raise the temperature. If the urine is too hot, remove the cap and heater and gently blow on the urine until it comes into the correct range.
-
Practice cooling the water. Take the tube alone, go to the sink, and put it in hot water, driving the temperature off the scale above 100F. Gently blow on the liquid until the rainbow temperature indicator comes into the 90- to 99-degree range. This does two things: It lets you see the rainbow indicator on the temperature strip and gives you experience bringing the temperature down, just in case the temperature rises above 100 degrees.
-
Be sure the heater is not too close to the temperature strip, or the strip will measure the heater instead of the water. Use rubber bands or adhesive tape for a snug fit between the heater and tube.
-
Do not remove the heater from the tube unless the urine is too hot; otherwise, the temperature will eventually fall out of the required range of 90 to 99 degrees.
-
Before preparing the kit, make sure you know when your 10-panel drug test will take place, as these heaters are single-use.
-
Extra heaters are available at the time of purchase. They are highly recommended in case the test gets delayed.
-
A digital thermometer is also available at the time of purchase. Some people find providing a wider temperature reading helpful than the strip can. This option is highly recommended for first-time users who need to conceal illicit drug use.
-
An option for extra vials (50 ml or 15 ml) is handy when the extra volume is needed. Technically, you only need drops to conduct your experiment, but extra volume is useful to impress the audience or send a strong message. You can dilute the powdered urine we give with 50 percent more water (25 ml) without causing any adverse effects.
FAQ
Is Powdered Urine Real Urine?
The kit contains powdered urine with real, drug-free human urine qualities. This urine in powdered form has uric acid and other compounds in authentic human urine. It will behave the same as a normal, clean urine sample in-home tests and when applicants or those in a drug-court program go to take their tests. If it is used correctly, the powdered urine sample will avoid a positive test result and conceal the use of illicit substances like THC, opiates, synthetic opioids, stimulants, and others. It will also behave accordingly for any experiments performed for health care, the creation of medicine, or similar purposes.
The powdered urine kit also differs from synthetic urine or fake pee advertised in other Fake Urine kits. Synthetic urine is made using chemicals and is typically used to test the effects of urine on bedding, diapers, and other products that are likely to come in contact with it. We don't recommend using such a product for specimen validity testing or tests detecting a drug's presence, as it may produce a false-positive result.
How Do You Use Clear Urine Powder?
Follow these steps to use the powdered urine kit for your experiment
-
Pour the vial of powdered urine into the collection container tube included in the kit.
-
Stick the temperature strip to the tube that comes with the kit.
-
Fill the tube with water that reaches the top of the container and put the cap on tightly.
-
Shake the tube to dissolve the powdered urine.
-
Stick the heater to the backside of the tube.
-
Verify the temperature and submit.
Check out the product pamphlet and this page for detailed instructions and tips.
Can a Real Powdered Urine sample be saved if I don't use it the day it was mixed?
Yes, as long as it's used within 72 hours. This is the maximum time the sample can be refrigerated, and you'll need to reheat it using the original process. Reheating more than once or attempting to use the kit after 72 hours will not produce the desired results.