FREE SHIPPING for all US Orders over $145
Alcoscan AL2500 Elite Digital Alcohol Breathalyzer
breathe into the detector and read your blood alcohol level
hand-held, reliable, resusable
power on, wait for the beep, blow
clear digital display with three-digit LED readout and backlight for night use
audible alerts, low battery indicator and auto power off
pocket size - 4 x 1.7 x .7 inches, only 3 ounces with two AA batteries
DOT/NHTSA Approved, FDA 510(k) Cleared, ISO 9002 Certified, Meets US Coast Guard Requirements
accuracy of +/- 0.01% at 0.10% BAC
recalibration required after 200 tests or one year
Contents
breathalyzer
two AA batteries
three mouthpieces
complete and detailed instruction sheet
Instructions
Press the power button. Attach a mouthpiece to the slot above the display. The tester will indicate the completion of the 30-second warm-up process when "0" is displayed.
When you hear two beeps, take a deep breath and blow steadily for 3-4 seconds.
After a proper sample has been blown, it will beep once to show that it has taken a reading.
After the analysis is complete, the "WAIT" indicator will turn off and the unit will beep again. You will then see a Blood Alcohol Concentration reading in the display.
To retest, press the power again and repeat procedure.
Notes
The tester will automatically shut off if you do not blow within 20 seconds.
If you blow less than 0.01% BAC, the sensor may not be activated and it will display 0.00% BAC.
If the BAC level is over 0.05% BAC, a warning light will flash
Do not use this tester as a tool to drink and drive.
Recalibration required after 200 tests or one year.
For accurate results, space tests at least two minutes apart.